Busbar Processing Machines for Copper & Aluminum
Cutting, punching and bending equipment for switchgear and electrical panel production.
STANDARD 3-IN-1
MOTI-50-3NC
Cut, punch and bend with independent workstations and CNC bending control.
SERVO 3-IN-1
MOTI-50-3NC PRO
Four servo positioning axes for repeated lengths, hole coordinates and bend settings.
HEAVY-DUTY 3-IN-1
MOTI-80-3NC
For thicker connections: 20 × 300 mm main processing, with separate edge-bending limits.
Cut. Punch. Bend.
Three processes. One workstation.
12 × 160 → 20 × 300 mm
Published standard 3-in-1 capacities*
Jinan, China
Equipment, tooling & technical support
THE MACHINE RANGE
Busbar machines for your production.
Compare the published working range, then look closer at positioning, tooling and the work each operator performs.
3-in-1 workstation
Everyday busbar fabrication for panel workshops.
12 × 160 mm
Thickness × width · operation limits apply
Servo 3-in-1
Four servo positioning axes for repeated work.
16 × 250 mm
Thickness × width · operation limits apply
Heavy-duty 3-in-1
For thicker and wider copper busbars.
20 × 300 mm
Thickness × width · operation limits apply
*Published capacities are for preliminary selection. Material, tooling and individual operations must be checked against your drawing.
FROM COPPER BAR TO CONNECTION
Busbar cutting, punching and bending.
See the workstations, tools and sample shapes behind the finished electrical connection.
Cutting
Prepare the blank with a defined length and supported stock.
Punching
Keep common holes ready in a turret and locate each pattern.
Bending
Match direction, radius and flange geometry to the right tool.
TOOLS & WORKPIECES
Tooling for the finished connection.
Round holes, slots, U and Z bends, twists and formed connections call for different tools. Use your finished-part drawing to define the punch set, bend direction and machine interface.
- Hole profiles and repeat patterns
- Bending radii and assembly clearances
- Custom punching and forming tools
MOTI · JINAN, CHINA
Equipment and tooling, built around the connection.
Our work brings machine preparation, busbar tooling and customer parts into one project. This MOTI workshop photograph shows machining of equipment components.
Customer projects document sample tooling, checks before shipment and follow-up with machines in use.
CUSTOMER PROJECTS
MOTI machines in customer workshops.
Explore equipment and tooling projects, shipment preparation and customer follow-up from four markets.
BRAZIL · HEMACK · CUSTOMER PROJECT
HEMACK: from a machine demonstration to connection tooling
A MOTI-50-3NC project for HEMACK in Brazil, covering FEIMEC contact, connection drawings, dedicated forming tools and shipment preparation.
Explore project
BRAZIL · TRISKEL · CUSTOMER FOLLOW-UP
TRISKEL: supporting an 80-3NC in an operating workshop
MOTI’s May 2026 visit to TRISKEL in Brazil, reviewing the 80-3NC in use and discussing maintenance, production and future upgrades.
Explore project
UNITED ARAB EMIRATES · CUSTOM CONFIGURATION
Two punching stations for a different production balance
A custom MOTI machine supplied to the UAE: two six-die punching units, one cutting unit and independent hydraulics for 12 × 160 mm busbars.
Explore project
Plan your next machine.
Practical guides for comparing positioning, defining tools and preparing your workshop.
BEFORE YOU ASK
Questions before choosing a busbar machine.
Start with thickness and the required process. The 30-3NC MAX and 200B have a 12 × 200 mm working range. The 50-3NC PRO specifies 16 × 250 mm; standard 50-3NC width is confirmed for the selected configuration within the 16 mm thickness class. Dedicated bending machines have direction-specific limits. Send a drawing before choosing.
The CNC description needs to be checked per operation. Standard machines require workpiece handling. The 50-3NC PRO specifies four servo positioning axes; these assist positioning and do not remove all operator handling.
Yes. Send the hole or bend drawing, material, thickness, edge distances and machine interface. Our HEMACK project includes drawing-specific connection tooling, which is quoted separately from a general machine package.
Provide your drawing, material, maximum thickness and width, hole and bend requirements, daily quantity, electrical supply and destination. Ask for an itemized machine, tooling and service scope.
Tell us about the busbars you make.
Share your material, maximum thickness and width, and the cutting, punching or bending work you need. A drawing or a sample requirement helps us discuss the right machine and tooling.
We use your details to respond to your machine enquiry. For drawings, use the email or WhatsApp links below.
Have a drawing? Attach your PDF, CAD file or clear part photo in email or WhatsApp. Include material, thickness, width and quantity.