3-in-1 workstation
MOTI-30-3NC
Everyday busbar fabrication for panel workshops.
12 × 160 mmThickness × width · operation limits apply
Portable hydraulic set
MOTI-200BPortable Hydraulic Busbar Machine
Separate processing heads for flexible placement.
The 200B combines separate cutting, punching and bending units with hydraulic power. Its 12 × 200 mm range supports initial selection for work that benefits from movable processing equipment. Confirm the weight and handling of each part of the set.
Thickness × width12 × 200 mm
Send your drawing to check material, tooling and operation limits.
THE RIGHT APPLICATION
Separate hydraulic tools for a more movable processing arrangement.
The MOTI-200B combines cutting, punching and bending tools with a split hydraulic arrangement. It is a practical option to discuss for smaller batches, installation adjustments or a supplementary workshop station. The Australia delivery identifies a 12 × 200 mm range and upgraded punching tools. “Portable” describes a system that can be relocated appropriately; the legacy specification lists a 195 kg overall weight, so plan the movement of the pump, tools and bench.
01 TECHNICAL OVERVIEW
Know the working range.
Machine specifications from MOTI product information. Your quotation defines the supplied version and tooling.
| Thickness × width | 12 × 200 mm |
|---|---|
| Cutting / punching / bending units | CWC-200 / CH-70 / CB-200 |
| Legacy published force — confirm version | 630 kN |
| Legacy overall weight | 195 kg |
| Legacy table dimensions (L × W × H) | 730 × 900 × 1150 mm |
| Legacy power options | single-phase 220 V / three-phase 380 V, 50 Hz |
02 INSIDE THE PROCESS
See how the work gets done.
Equipment details, positioning and the workpiece requirements to discuss for this model.
01
CWC-200: cutting
The cutting unit prepares busbar lengths as part of the combined system. Support the incoming bar and finished length, and check the selected hydraulic and blade configuration for the material you intend to process.
02
CH-70: punching
The Australia project identifies the CH-70 punching tool and describes upgraded dies with positioning pins. The pins help establish the hole reference. Specify each required hole, its edge distance and material thickness when ordering the die set.
03
CB-200: bending
The separate bending unit gives the system its third process. Review the required angle, tool opening and length of each flange, together with the space available to support the workpiece at the proposed location.
03 TOOLS & FINISHED PARTS
Specify what you need to make.
The final tool package follows your part geometry and the selected machine configuration.
Hydraulic arrangement
Specify the pump, hoses, connections and each tool supplied as one compatible package.
Punch and die list
Legacy information lists several diameters but does not completely identify all six listed sets. Require an itemized set for your order.
Electrical supply
Legacy versions refer to single-phase 220 V or three-phase 380 V at 50 Hz. State the supply at the place of use.
04 FROM SELECTION TO PRODUCTION
Review a complete working cycle.
- 01
Plan the working location
Identify whether the tools will stay in one workshop, travel by vehicle or move between floors. Ask for individual component dimensions and weights, and provide stable support for the equipment and bar.
- 02
Match the hydraulic tool set
Review the actual cutting, punching and bending requirements separately. Check the intended pump and power supply, rather than selecting the whole system from the headline width alone.
- 03
Review sample parts
Use a representative hole pattern and bend. Include the time required to move and set up the tools when comparing this arrangement with a fixed 3-in-1 workstation.
05 MOTI-200B · QUESTIONS
Before you choose.
Can one person hand-carry the complete machine?
The legacy table lists 195 kg for the overall equipment. It should not be described as a complete hand-carried machine. Request the component weights and plan suitable transport and lifting.
Which tools make up the 200B?
The Australia delivery names CWC-200 for cutting, CH-70 for punching and CB-200 for bending, using a split hydraulic system.
What changed in the Australia tooling?
The project describes positioning pins and gives the die material as Cr2MoV. Confirm the required die material and interface in your own quotation; other MOTI models have different tooling descriptions.
06 COMPARE OPTIONS
Find the right level of capability.
Wide-format 3-in-1
MOTI-30-3NC MAX
More width in the 12 mm thickness class.
12 × 200 mmThickness × width · operation limits apply
3-in-1 workstation
MOTI-50-3NC
A wider working range for panel production.
16 × 250 mmThickness × width · operation limits apply
LET’S START WITH YOUR DRAWING
A better fit starts
with your requirements.
Tell us your material, busbar size and operations.
We’ll help you select the machine and tooling.